Stop Function; Intended Use - OK. OTO 400-B Mode D'emploi

All manuals and user guides at all-guides.com

STOP FUNCTION

MAINTENANCE
NOTE
• Smaller bread slices can be removed by lifting the carriage lever.
• Use toaster on a dry, level surface, leaving sufficient space on top and all
sides for air circulation.
• If the toaster is not plugged in, the carriage lever will not click in place when
pressed.
• Do not toast bread and warm bread rolls simultaneously.
• Each bread slot can accomodate one slice of bread only.
• Caution! In the unlikely event that bread or crumpet become jammed,
unplug the toaster from the mains supply and let the toaster cool down
completely. Carefully remove any residues, ensuring that you do not damage
the toaster.
• Important! Only toast bread without any fillings or topping.
DISPOSAL
The crossed-out wheeled bin logo requires the separate collection of
waste electric and electronic equipment (WEEE). Electric and electronic
equipment may contain dangerous and hazardous substances. Do not
dispose of this appliance as unsorted municipal waste. Return it to a
designated collection point for the recycling of WEEE. By doing so, you will
help to conserve resources and protect the environment. Contact your retailer
or local authorities for more information.

INTENDED USE

This appliance is intended for toasting bread. Only use according to these
instructions. Improper use is dangerous and will void any warranty claim.
15
The toasting process can be stopped at any time by
pressing the stop button
The carriage lever will slide up into the upper
position.
1. Unplug the toaster from the mains supply and
allow toaster to cool down.
2. Clean the crumb tray and reinstall it.
3. Wipe the surface of the toaster with a slightly
damp cloth and polish with a soft dry cloth. Do
not immerse the unit in water. Do not use caustic
or abrasive cleaners.
Clean the crumb tray regularly. Do not allow bread
crumbs to accumulate in the bottom of the
toaster.
EN
.