To enable the Alarm
Press the "UP" button to turn the alarm on or off.
When the alarm is enabled, a small bell icon is displayed to the left of the time.
Maximum and minimum temperature display
Press the MAX / MIN button once to display the maximum temperature and humidity.
Press the MAX/MIN button again to display the minimum temperature and humidity.
The minimum and maximum readings are reset automatically every day.
Time format
To change the time format from 12 hour to 24 hour clock or vice versa, press and hold the
UP button for 3 seconds.
Temperature units
To change the temperature format from °C to °F or vice versa, press and hold the DOWN
button for 3 seconds.
Snooze
When the alarm sounds, press "SNZ" to activate the sleep (snooze) mode. The alarm will
repeat a few minutes later.
Light
Press the "LIGHT" button to turn on the screen light. The light turns off automatically after 6
seconds.
12 Hour Temperature Trend Diagram
The six-section bargraph display shows the temperature trend for the last twelve hours. If
the temperature was below the present temperature then it is displayed by bars below the
centre line. If the temperature was above the present temperature then it is displayed by
bars above the centre line. The number of bars indicates the amount by which the
temperature was above or below the present temperature.
The display shows the temperautre 12 hours, 6 hours, 3 hours, 2 hours and 1 hour ago.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of
charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer may take
the old appliance for disposal.