Westinghouse WST2017ZE Manuel Du Propriétaire page 8

OPERATING INSTRUCTIONS
TO USE SCISSORS SHARPENER
1. Place Can Opener on level surface.
2. Plug the Can Opener into a 120V
AC electrical outlet.
3. Turn the unit around so that the
Knife/Scissors sharpening slots are
facing you. The horizontal sharpen-
ing slot is designed especially for
scissors.
4. Press down and hold the Operating
Lever. Place one blade of the scissors
in the groove and slowly draw the
blade to the right with a slow, even motion. Repeat with the other
blade.
TO USE BOTTLE OPENER
1. Unplug appliance from electrical socket.
2. Place Can Opener on a level Surface. To
steady, position one hand on top of the
Can Opener.
3. Place bottle cap edge under Opener
Flange.
4. Apply downward pressure on bottle until
cap pops off.
NOTE: This bottle opener is not recommend-
ed for bottles having "Twist-Off" caps.
(Cont.)
8
Figure 3
Figure 4