HEAT GUN USE AND CARE
1. Do not force the heat gun. The heat gun will do the job better and safer at the rate for which
it was designed.
2. Do not use the heat gun if the switch does not turn on and off. If the heat gun cannot be
controlled with the switch it is dangerous and must be repaired.
3. Disconnect the plug from the power source from the heat gun before making any
adjustments or storing a heat gun. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle heat gun out of the reach of children and do not allow persons unfamiliar with
the heat gun or these instructions to operate the heat gun. Heat gun is dangerous in the
hands of untrained users.
5. Maintain a heat gun. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the heat gun's operation. If damaged,
have the heat gun repaired before use. Many accidents are caused by poorly maintained
power tools.
6. Use the heat gun in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the heat gun for operations different
from those intended could result in a hazardous situation.
7. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow safe handling and control of the heat
gun in unexpected situations.
8. When using the heat gun, do not wear cloth work gloves which may be entangled.
The entanglement of cloth work gloves in the moving parts may result in personal
injury.
ADDITIONAL SAFETY INSTRUCTIONS FOR HEAT GUN
• Do not place your hand over the air vents or block the vents in any way.
• The nozzle of this heat gun becomes extremely hot during use. Let nozzle cool down
before touching.
• Always switch the heat gun off before putting it down.
• Do not leave the heat gun unattended while it is switched on.
• A fire may arise if the heat gun is not used with care.
• Heat may be conducted to combustible materials that are out of sight. Do not use in a
damp atmosphere, where flammable gases may be present or near combustible materials.
• Place a heat gun on it's stand and allow to cool fully before storing.Ensure adequate
ventilation as toxic fumes may be produced.
• Do not use as a hairdryer.
- 10 -