Speed Settings - Westinghouse WST2010ZE Manuel Du Propriétaire

Table des Matières

Publicité

OPERATING INSTRUCTIONS
1. Make sure the Mixer is unplugged and the Speed Control Lever is
in the OFF position.
2. Attach Beaters (see "ATTACHING BEATERS").
3. Plug the Power Supply Cord into a 120V AC electrical outlet.
4. Place Beaters directly into container holding ingredients to be
mixed.
5. Select the speed setting that matches your mixing task. (See
"SPEED SETTINGS" for more information.)
6. After you have finished mixing, turn the Speed Control Lever to
OFF and unplug the appliance.
7. Raise the Mixer and press down on the Beater Eject Button to eject
the Beaters.
8. Scrape excess batter off the Beaters using a rubber or plastic
spatula. DO NOT strike Beaters on the rim of the bowl.

SPEED SETTINGS

Your Deluxe Hand Mixer has 10 different speed settings. Each setting
on the LOW and HIGH Buttons has 5 speeds/functions. Below is a
guide which details each speed setting and its usage. Please note that
the Turbo Boost-of-Power feature can be used at any speed setting by
depressing the Turbo Boost-of-Power Button. Resume previously selected
speed by releasing Turbo Boost-of-Power Button.
NOTE: DO NOT use Turbo Boost-of-Power feature for more
than 2 minutes at a time as the Motor may overheat and
damage the Mixer.
6

Publicité

Table des Matières
loading

Table des Matières