Publicité
Les langues disponibles
Les langues disponibles
FITTING INSTRUCTION STAR MIRROR
Important :
• Carefully inspect the mirror before installation. If there are any problems, report it immediately to your dealer as no claim for damage will be considered after installation. No claims
for defects or damages will be accepted once the mirror has been installed.
• Mirrors are guaranteed for one year from date of invoice, no claim will be considered if product has not been installed and cared for as recommended in our fitting and care ins-
tructions.
• The mirror may have defects which are naturally associated to the product. The visual inspection must take place at a minimum of 70cm. If the defect is not visible at this distance
the claim will not be accepted.
• For claims about defects appearing over time (e.g. de-silvering, ageing of glass etc.) the product must be inspected by a representative of Ambiance Bain to clarify if there is a
viable claim.
• The guarantee covers products in domestic use by the consumer only and not commercial or business use.
• Liability is limited to individual products and does not cover consequential loss/damage or any further unfitting/refitting costs or financial compensation.
• Installation must be made by a qualified professional, the guarantee will not apply if the product is incorrectly fitted.
Maintenance :
• For mirrors, use a chamois leather, and dry the edges with a suitable soft cloth.
• Use a dry cloth to clean any electric components, they must be switched off
OUR MIRROR WILL DETERIORATE THROUGH EXCESSIVE WATER SPILLAGE OR HEAVY CONDENSATION. IT IS AD-
VISED THAT EVERY BATHROOM SHOULD BE WELL VENTILATED AND FITTED WITH A SUITABLE EXTRACTOR FAN TO
AVOID ANY PERSISTENT HUMIDITY TO PRESERVE THEIR QUALITY.
Electrical installation :
Mirrors with electrical components must only be installed in ZONE 3. Installation and fitting of all electrical items
must be completed by a qualified electrician. Any final decisions regarding the installation should also be made by
the electrician. All electrical items must be tested prior to installation, as liability is limited to replacement items only.
All information is dowloadable from the website
PREPARATION OF THE INSTALLATION AREA
Set up a protected installation area (blancket)
Unpack carefully the mirror
Be careful do not damage with the stanley knife
Clean the mirror with a mild, non-greasy product on the front
FIT THE LIGHT ON THE MIROR
FIX THE LIGHT ON THE MIRROR
WITH THE SUPPLIED SCREWS
FIX THE LIGHT ON THE TOP AND BOTTOM
OF THE MIRROR
FIX THE SCREWS (not provided)
1. DETERMINE THE
FINISHED HEIGHT
CAUTION :
Ensure that you use the
correct fixing according to the
type of wall construction
HANG THE MIRROR ON THE SCREWS
It is recommended to put a silicone point in each
bottom corner of the mirror
www.ambiancebain.com
tools required
2. FIX THE FIRST SCREW
3. THE SCREW MUST
PROTUDE MAXIMUM 8
MM FROM THE WALL
All dimensions are in mm.
Recommended height 1600 mm at the middle of the mirror.
C090V1.2
4. FIX THE SECOND SCREW
ALIGNING IT WITH THE
FIRST ONE
LEVEL ADJUSTMENT
UK
Publicité
