Making Basic Settings; Locks/Unlocks Device; Setting The Time - snuutje PINO SNU 2001 Mode D'emploi

MAKING BASIC SETTINGS

‚ The following applies to all settings: If
‚ If you hold down the - or + button while

LOCKS/UNLOCKS DEVICE

To protect against unintentional changing of the device
settings, the device has a LOCK function.
− When the lock symbol
must first unlock the device to make changes. Hold
down the LOCK button on the bottom of the device for
a few seconds until the lock symbol disappears from
the display.
− After making the settings, briefly press the LOCK
button once to reactivate the lock function.
Settings can only be made or changed when the device is
unlocked.

SETTING THE TIME

1. Press SET.
"SET" appears on the display.
2. Press TIME.
The hour digit flashes on the display.
3. Use the - / + buttons to set the current hour.
there is more than approx. 30 seconds
between two pushes of a button, the
setting process automatically ends and
you will have to repeat it.
making settings, the displayed values
advance faster.
appears on the display, you
39