Publicité
Read the manual
Warning
Wear dusk mask
Do not dispose of old appliances in the
household garbage
Disconnect from power supply while
maintance
High-low speed conversion (Fig.7)
Turn the gear knob (8). When the "
Ⅰ" on the knob aligns with the arrow on the gearbox, turn on the
switch (6) and the machine outputs low speed. When the "Ⅱ" on the knob aligns with the arrow on the
gear box, turn on the switch (6) and the machine outputs high speed. Under normal circumstances, the
use of ≤φ8mm drill bit gear knob (8) transferred to "Ⅱ", ≥φ8mm drill bit gear knob (8) transferred to " Ⅰ ".
It is recommended to use "Ⅱ
MAINTENENCE
Publicité
