Proposition 65; Installation; Unpack The Machine; Attach The Guard - GreenWorks STA805 Manuel D'opérateur

8

PROPOSITION 65

WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
Save these instructions.
9

INSTALLATION

9.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
9.2

ATTACH THE GUARD

WARNING
Do not touch the cut-off blade.
1. Remove the screws (1) from the trimmer head with a
Phillips head screwdriver (not included).
2. Install the guard into the slots on trimmer head.
3. Turn the guard counterclockwise to lock it into place.
English
4. Align the screw holes on the guard with the screw holes
(2) on the trimmer head.
1
2
5. Tighten the screws.
9.3 ATTACH THE AUXILIARY
HANDLE
1. Remove the knob from the handle.
2. Attach the auxiliary handle (1) on the shaft.
3. Set the auxiliary handle in the comfortable position.
4. Put the bolt (2) through the holes.
5. Tighten the auxiliary handle with the knob (3).
7
S L I D E O V E R H E A D
AND TURN COUNTER
CLOCKWISE
EN