Publicité
Les langues disponibles
Les langues disponibles
DIMMING CONNECTION
1) Use wiring approved for unenclosed Class 2 circuits
2) Open the dimming port located on the top funnel of the lamp
3) Insert supplied plug into the port
4) Carefully screw in lamp into luminaire while making sure not to
tangle wires
5) Connect 0-10V wires to a listed 0-10V dimmer, sensor or
controller using listed wire connectors
6) If using sensor or controller that requires 12V power connect
wires using listed wire connectors, otherwise make sure the
wires remain capped.
7) Organize and secure wires in luminaire using listed cable ties or
other wire management devices
8) Lamp will continuously dim down to 20% using a 0-10V signal
HIGH BAY RETROFIT LAMP
DIM
DIM
+0-10V
INSTALLATION AND USERS GUIDE
AUX
AUX
+12V
-
-
8/22/2022
LED-8242MXXD
270W
Publicité
