Light Efficient Design LED-9206-50K Guide D'installation Et D'utilisation

LED High Bay Fixture
LED-9206-50K, LED-9210-50K, LED-9215-50K
PRIOR TO INSTALLATION, PLEASE READ THE ENTIRE INSTALLATION INSTRUCTIONS
INSTALLATION AND SERVICE OF THIS FIXTURE SHOULD BE PERFORMED BY A QUALIFIED AND LICENSED ELECTRICIAN.
NOT FOR EMERGENCY LIGHTING.
NOT FOR USE IN ENVIRONMENTS WHERE EXPLOSIVE OR CORROSIVE GASES ARE PRESENT.
FOR INDOOR USE ONLY. SUITABLE FOR USE IN DRY OR DAMP LOCATIONS.
DO NOT USE IN LOCATIONS WHERE FIXTURE MAY BE EXPOSED TO WATER.
WARNING – RISK OF FIRE OR ELECTRIC SHOCK. DISCONNECT POWER AT THE SOURCE BEFORE INSTALLATION OR SERVICE OF THIS FIXTURE.
OPERATING TEMPERATURE IS BETWEEN -4F AND 122F.
INSTALLER IS RESPONSIBLE FOR ENSURING INSTALLATION IS COMPLIANT WITH APPLICABLE CODES AND REGULATIONS.
LUMINAIRES COME WITH A 5 YEAR WARRANTY AGAINST MANUFACTURING DEFECTS.
THIS WARRANTY DOES NOT COVER PHYSICAL DAMAGE OR IMPROPER OPERATION.
INSTALLATION REQUIREMENTS AND SPECIFICATIONS
MODEL POWER
LED-9206-50K
LED-9210-50K
LED-9215-50K
INSTALLATION INSTRUCTIONS
Please note: This luminaire is designed to be hard-wired into an
existing power source.
1) Turn off power at switch and/or circuit breaker.
2) Ensure that the luminaire and electrical inputs meet the
requirements in the table.
3) Install the stop nut onto the mounting hook as far as it will go.
4) Install the mounting hook into the top of the fixture, and lightly
screw it in as far as it will go.
5) Tighten the stop nut firmly. It should prevent the hook from
rotating.
6) Ensure that the mounting points for the fixture have adequate
strength to support the fixture. Check that there is clearance
around the fixture for air flow. Ensure that the fixture will not
be exposed to water or impact and that it is clear of any
combustible materials.
7) Connect the power cable to the power source.
AC – Line Black Wire
AC – Neutral White Wire
Ground Green Wire
8) Turn on electrical power to the luminaire and verify proper
operation.
INPUT
VOLTAGE
60W 100-277Vac
50/60Hz
100W 100-277Vac
50/60Hz
150W 100-277Vac
50/60Hz
Do not use much force.
INPUT LUMINOUS
CURRENT FLUX
0.6A 7,200 LUMENS
1.0A 12,000 LUMENS
1.5A 18,000 LUMENS
AC100-277V
INSTALLATION AND USERS GUIDE
CCT
5000K
5000K
5000K
CONTENTS
• LED light fixture
• Mounting Hook
• Instructions
turn off
1 2
3
4
turn on
FIXTURE
WEIGHT
4.6 LB
5.9 LB
6.6 LB
12/26/2020