Wet Cleaning - Axis PIVOT AX-1330 Manuel D'utilisation

body using a damp cloth and mild soap or detergent. To avoid damag-
ing your shaver, do not use harsh cleansers or solvents.

Wet cleaning:

1. Switch the shaver off and ensure that the power cord is not at-
tached. Depress the hairpocket release buttons on both sides of the
unit and gently lift the foil screen assembly off. (fig. 1)
2. Switch the shaver on and allow fresh cold or lukewarm water to run
over the cutters. (fig. 2)
3. When finished cleaning, switch the shaver off and replace the foil
screen assembly, making sure it
locks into place.
Axis Pivot |1| English
1 2
Using the cleaning brush:
1. Switch the shaver off and ensure
that the power cord is not attached.
Depress the hairpocket release but-
tons on both sides of the unit and
gently lift the foil screen assembly off. (fig. 1)
2. Gently brush the hairs from the inner cutters, the inside surface of
the foil screen assembly and the shaver's case. (fig. 3) To remove the
inner cutters for cleaning, gently lift straight up from its mount. (fig. 4)
3. To clean the delicate outer foil screens, gently wipe the surface of
the foils with tissue paper, being sure not to apply a
great deal of pressure.
4. When finished cleaning, reseat the inner cutters
on the mounts and replace the hairpocket, making
sure it locks into place.
Axis Pivot |1| English
3 4
5