Axis PIVOT AX-1330 Manuel D'utilisation page 11

2. First, connect the power cord to the shaver and
then plug it into an electric outlet. The charging
indicator light will glow green to indicate that the
unit is charging normally. Recharging generally
takes one hour. When fully charged, your shaver
will provide approximately one week of shaving run
time.
Storing the Shaver and Power cord
If the shaver is to remain unused for a long period of time, store the
unit and power cord in a cool, dry place. Do not wrap the cord around
the unit during storage. Avoid twisting the power cord. Be sure to
unplug and untwist the cord if it becomes twisted during use or while
charging.
Removing the Batteries for Disposal/ Recycling
It is important that the rechargeable batteries in your shaver be
recycled or properly disposed of after it has reached the end of its
Axis Pivot |20| English
useful life.
Turn the On/Off Switch ON and
run the shaver until the inner
cutters stop.
1. Remove the headguard, hair-
pocket, and inner cutters.
2. Remove the trimmer retainer.
3. Remove the 3 screw covers
on the back of shaver. Remove 2
side panels.
4. Remove 3 screws on the back
of shaver.
5. Gently pull the two halves of the
shaver body apart. Be careful that
Axis Pivot |21| English
trimmer retainer
screw cover
screw
side panel