MyChild Roundabout 4-in-1 Manuel D'utilisation page 6

Assembling the walker
3. Turn the assembled walker body and
legs the right way up. Line up the ends of
each leg with the openings on the walker
base.
Do not force the legs into the base.
Press in button (D) on each leg and
push legs into the openings on the base
ensuring all legs are locked into position
at the same height.
Attaching the walker's anti-fall blocks
4. With the baby walker upside down
place the anti-fall blocks around the
walker as shown, inserting the two plastic
stems on each block into the holes on the
walker's underside.
WARNING! Do not use the walker without
all eight anti-fall blocks attached.
(continued)
D
page 6