Filter Instructions; Filter Removal/Cleaning/Refitting - Oster 3203-33 Manuel D'instructions

Filter instructions

A mesh filter has been integrated into the kettle to reduce the amount
of scale residues entering your beverages or food. The filter is
removable for cleaning. To reduce scale build-up, empty out any
residual water after boiling.
How often the filter should be cleaned will vary according to where
you live and how often you use your kettle. Filter should be cleaned
whenever there are noticeable deposits left on the filter and especially if
the rate of pouring decreases.

Filter removal/cleaning/refitting

Important: The kettle must be switched off, disconnected from the
power outlet and allowed to cool down completely prior to removing
or refitting the
filter. Do not use excessive force, as this might damage the filter or the
lid.
1. Empty the kettle and remove lid.
2. Grip the top part of the filter with index finger and thumb and pull
upwards. You may have to hold kettle while remoivng filter.
Caution: Keep fingers clear of mesh. Pressing into mesh may damage
filter.
3. To clean the filter, rinse under a tap while brushing it gently with a
soft brush.
4. To refit filter, once again hold filter with index finger and thumb.
Gently push filter back into the kettle until you hear a click. The
filter is now reattached. Gently tug on filter to ensure filter is
attached properly.
5. Rinse out kettle with fresh water and it's ready for use.
5
All manuals and user guides at all-guides.com