Brief Introduction; Overview; Receiver - Oregon Scientific EW93 Mode D'emploi

BRIEF INTRODUCTION

Thank you for your purchase of this Weather Station
with Radio-Controlled Alarm Clock and Ice Alert.
Please read these instructions carefully and keep
the manual well for future reference.
The receiver unit has a clear and easy-to-read
display that shows the indoor temperature, time,
the maximum & minimum temperature records in
the past 24 hours as well as the outdoor temperature
measured and transmitted from the remote sensors.
It is able to receive and display readings from up to
3 remote sensors.
The 433 MHz technology means no wire installation is
required and you can place the sensors anywhere you
like within 30m (100ft) from the main (indoor) unit.
This product is designed to synchronize its date and
time automatically once it is within range of the
signal from the atomic clock in Germany/England.

OVERVIEW

RECEIVER

1
4
5
2
6
7
8
3
1.SNOOZE/LIGHT key:
• In normal time mode, press it once to turn on
the backlight for 5 seconds.
• Press it to silence the current alarm when it is
going and enter the snooze mode for 8 minutes.
2.LCD display:
• Displays outdoor & indoor temperature, time
and date.
3.Ice Alert indicator light:
• Flashes when the outdoor temperature is
between -2.0°C (28 °F) and 3.0°C (37 °F).
4.+/CHANNEL key:
• Press it once to switch among Channel 1, 2
and 3.
2
9
10
11
12
13
15
14