Simons Voss Technologies CR2450 Guide Abrégé page 13

Battery set (CR2450)
Malfunctions due to poor contact or different discharge
Contact surfaces that are too small/contaminated or different dis-
charged batteries can lead to malfunctions.
1. Only use batteries that are approved by SimonsVoss.
2. Do not touch the contacts of the new batteries with your hands.
3. Use clean and grease-free gloves.
4. Always replace all batteries at the same time.
Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.

Modifications or further technical developments cannot be excluded
and may be implemented without notice.
The German language version is the original instruction manual. Other
languages (drafting in the contract language) are translations of the
original instructions.
Read and follow all installation, installation, and commissioning in-
structions. Pass these instructions and any maintenance instructions to
the user.
2 Product specific safety notices
EN
NOTE
Further documentation
Battery replacement varies depending on the product
and is not described in this document.
Refer to the documentation of the respective

product.
2. Product specific safety notices
13 / 60