Function Description - Blooma AD0078 Mode D'emploi

SHIFT BUTTON
• Press the SHIFT BUTTON once (for less than 3 seconds) with a sharp tool to change the functions
from Photocell to Photocell W/Timer P1, Photocell W/Timer P1 to Photocell W/Timer P2 and
Photocell W/Timer P2 to Photocell. When the power is switched on, the unit is set to Photocell.
• User can change the "Fixed LUX" mode to "Adjustable LUX"
BUTTON once (for more than 3 seconds). The LED will flash 3 times as an indication. User can
adjust the LUX to the desired level using the LUX knob.
• User can change the "Adjustable LUX"
BUTTON once (for more than 3 seconds). The LED will flash 2 times as an indication. The LUX
setting will be the same as the current detected environment LUX level.
3663602893554-Blooma-A5-IM-V03.indb 8
Use
Benutzung
Uso
mode to "Fixed LUX" mode by pressing the SHIFT
Utilisation
Использование
Utilização

FUNCTION DESCRIPTION

Photocell: The light is controlled only by LUX
level.
Photocell W/Timer P1: The light switches ON
depending on the LUX level. The light can also
be switched ON and can be controlled by the
TIME control knob (adjustable from 4 minutes to
8 hours).
Photocell W/Timer P2: The light switches ON
depending on the LUX level. The light can also
be switched ON and can be controlled by the
TIME control knob (adjustable from 4 minutes to 8
hours). The light will be switched ON again about
2 hours before the LUX level user set at dawn.
However, at the first cycle the light will not switch
ON at dawn as product need to record first dusk to
dawn cycle duration.
mode by pressing the SHIFT
Użytkowanie
Utilizare
Kullanım
1/11/2017 14:02
8