Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING
Attach chains to tow bar with 7/16" Grade 2 U-bolts and flanged locknuts as shown below. Tighten each flanged locknut until at
1.
least 1/8" of U-bolt threads extend past locknut.
2.
The chains at each vehicle will be looped to themselves using quick links as shown below. The nuts on the quick links must have
full thread engagement.
3.
Cross two chains under coupler and connect to chain bracket on hitch or to frame of towing vehicle,
allowing only enough slack to permit turning.
4.
Connect the other two chains to the frame of the towed vehicle as close to the front of the vehicle as
possible. Allow only enough slack to permit the up and down pivoting of the tow bar.
SAFETY CHAINS
Connect safety chains (70248) to both vehicles and the tow bar itself as shown below.
Publicité
Table des Matières
