Philips HP8360/00 Mode D'emploi page 9

 If the straightening plates are unlocked, press the two plates
together and push the locking button to lock them in this position.
Tip: The straightener heats up more quickly when the straightening plates are
locked together.
 Set the on/off slide switch to 'I' (Fig. ).
The light of temperature setting 1 starts flashing on the display to
,
indicate that the appliance is heating up to this setting (Fig. ).
The active cooling light on the display goes on to indicate that the
,
active cooling system is activated (see section 'Active cooling
system' below) (Fig. 5).
Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and
when it is hot.
Select a temperature setting (1 to 5) that is suitable for your hair

type.
Always select a low setting when you use the straightener for the first
-
time.
- For coarse, curly or hard-to-straighten hair, select a medium to high
setting (3-5).
For fine, medium-textured or softly waved hair, select a medium to
-
low setting (1-3).
Note: Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.
5
Use the % and ^ button to set the appropriate temperature
setting. (Fig. 6)
The lights up to the selected temperature setting flash on the
,
display to indicate that the appliance is heating up to this setting.
,
When the lights up to the selected temperature setting stop
flashing, the appliance has heated up to the selected setting and is
ready for use.
Comb or brush your hair so that it is disentangled and
6
smooth (Fig. 7).
EnglisH