Auto Power Down - Edenwood ED65A01UHD-VE Guide D'utilisation

Device
Identification
Software
upgrade
Application
Version
Subtitle Mode
Auto Power
Down
Store Mode
Power Up Mode
OSS
Restore Default
Boot Logo
Change Friendly
Name
Application
Priority
Dolby Notification
Note: Some options may not be available depending on the model of your TV, its features and the selected country in the First Time Installation.
When this option is enabled it causes a 'Device ID' to be generated internally for each
Web origin visited. When disabled all the current 'Device ID's' are cleared for each Web
origin that was visited. You can enable or disable this feature by setting it as On or Off.
This feature is available if channels are installed and the country option is set as Norway
during the first time installation.
Ensures that your TV has the latest software. Press OK to see the menu options.
Displays current software version.
This option is used to select which subtitle mode will be on the screen (DVB subtitle /
Teletext subtitle) if both are available. Default value is DVB subtitle. This feature is
available if channels are installed and the country option is set as Norway during the
first time installation.
Sets the desired time for the TV to automatically go into standby mode when not being
operated. This option can be set from 1 to 8 hours in steps of 1 hour. You can also
disable this option by setting as Off.
Select this mode for store display purposes. Whilst Store Mode is enabled, some items
in the TV menu may not be available. For some models Enabled with video option
may also be available. If this option is set, the TV will switch to store mode and the
pre-installed video file will be played back.
This setting configures the power up mode preference. Last State and Standby Mode
options are available.
Displays Open Source Software licence information.
Restores the default boot logo. A confirmation message will be displayed. Select Yes
and press OK. This option may not be available depending on the model of your TV
and its features.
Using this option you can change the device name that is used to identify your TV when
connecting a device to the TV wirelessly. The default device name will be restored if the
device name is left blank or first time installation is performed.
You can set your preference regarding the priority between the broadcast applications
and CICAM AppMMI applications using this option. In case a CICAM is inserted into
the TV and a contention occurs between the applications the priority will be given to
the selected type of application.
Sets the notification appearance preference for Dolby content. When set as On, Dolby
logo will be displayed on the screen when Dolby content is detected.
English - 66 -