Beper 40.992 Manuel D'instructions page 8

Nail Led Lamp Use instructions
If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply
cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable,
especially for children who could play whit the appliance.
Let other potential users read these instructions.
Keep these instructions
INSTRUCTIONS FOR USE
This LED nail lamp has been manufactured only for household use and cannot be used be for indu-
strial or commercial use.
Do not try to open the LED nail lamp or any parts of it.
Never leave the appliance unattended as long as the power plug is connected with the power outlet.
Use only provided accessories.
A regular cleaning of this LED nail lamp will keep it intact as long as possible.
Do not use if the LED nail lamp is damaged; contact directly the provider or assistance centre.
DESCRIPTION
1 – Lamp body
2 – LED
3 – Switch on/off I/0
4 – Timer function 30/60/90 seconds
5 – Continuous function
6 – adaptor socket
7 – Slide base plate for easy cleaning
INSTRUCTION
Before use please read instructions carefully.
• Do not get into contact with water.
• If not in use, switch it off and disconnect from the power.
• To be used only for fingernail and toenail curing.
• Do not look straight into the illuminated bulbs.
• Note that over exposure to LED lamps can cause skin or eye damage.
• Whenever you recognize a changing of the skin, seek medical advice.
• Children are not allowed to use the lamp without supervision of an adult.
• The lamp is for household indoor use only therefore never use it outdoor, that damages the quality
of the gel used.
• Malfunction has to be solved by an expert.
ATTENTION : only use professional gel ; the bad quality gel may burn nails with the LED light of the
appliance. In case of burns or if too hot, stop immediately.
USE
30 = lamp works for 30 seconds
60 = lamp works for 60 seconds
90 = lamp works for 90 seconds
= continuous functionament
8