Fitting the batteries
1. Turn o unit prior to tting or
replacing batteries.
2. Unscrew the battery cap by hand.
Battery requirements
Your Halo LS Capsule requires 2 x LR6 AA 1.5V alkaline batteries.
The use of good quality batteries is essential for maximum battery life.
To reduce the risk of battery leakage:
• DO NOT mix old and new batteries
• DO NOT mix di erent battery types
• The use of rechargeable batteries is NOT recommended
Please ensure the batteries are removed from the Capsule during long periods without use.
Drying out after use in heavy rain
Your Halo LS Capsule has been designed to be waterproof. However, if exposed to prolonged
heavy rain or frequent submersion, it is important to allow the unit to dry out properly by
bringing the unit indoors and allowing to dry fully after use.
NEVER place batteries in a hot environment (e.g. on a radiator).
3. Take care removing the batteries.
They will freely slide out of the Capsule.
4. Insert new batteries and ensure
correct polarity.
• Do not trigger the LED in close proximity to human eyes.
• Store this equipment out of reach of children and infants.
• Avoid dropping or subjecting the Capsule to severe impacts.
Warranty & product registration
For customer service returns:
Fox International Group Limited
Customer services
Dennenlaan 3A
2340 Beerse
België
eurocustomerservices@foxint.com
FOX and Halo are Registered Trade Marks.
We reserve the right to alter or modify the contents of this manual.
Hereby, Fox International Group Ltd, declares this Halo LS Capsule
is in compliance with the essential requirements and other relevant provisions of
Directive
https://www.foxint.com/home/support/declarations-of-conformity/
IP Rating: IPX7
5. Screw the battery cap back
6. For best weatherproo ng, ensure the
battery cap has a good seal by rmly
tightening onto the Capsule,
compressing the O-Ring seal.
Warnings
2014/30/EU.
The R&TTE documents can be found at:
onto the Capsule.