1
1
Attach the foot care head [J].
• Push down firmly until you hear a "click".
2
2
Press the power switch [K]
once.
• NORMAL mode is recommended for
rotation speed. (
Page 15)
3
3
Bring the foot care head into contact with the
skin, and begin filing.
• Filing a single location for a long time can cause it to
become hot with friction. To avoid this, be sure to make
small changes in the filing position while filing.
• Filing should be performed about once every two weeks.
The basics of foot care
Do not use the product for filing anything other
than calluses and hardened skin on the feet.
Callus
A callus is a hardened layer that forms through
repeated pressure or abrasion.
a Hardened layer
b Epidermis
c Derma
18
2
<Use on>
Things to be careful of when filing
1
Before use
• Filing an area too deeply can cause it to become sore or
inflamed.
• Filing too large an area can result in even larger calluses
forming. Therefore, be sure to leave some of the hardened
layer.
Tips for moving the foot care head
Move in the direction indicated by the arrows.
Use your free hand to support filing.
After use
a Hardened layer
b Epidermis
c Derma
d Portion to be removed
e Leave some of the
hardened layer.