Making Juice - Ceado G210 Manuel D'utilisation

GB
Semi-automatic model
4
Select the proper size polycarbonate reamer. Use the large reamer for grapefruit and oranges
or the small reamer for lemons and limes. Push the reamer all the way down onto the motor
shaft.
5
Place the splash guard onto the top of the container.
7
Plug the juicer into an electric outlet.

Making juice

Make sure the fruit is at room temperature.
1 Prepare all the fruit ahead of time by cutting the fruit in half. This will make the juicing process
quicker.
2
Place a container under the spout to collect the juice.
3
Push the power switch to the ON position. For the semi-automatic model, the reamer will begin
spinning.
4
Ream the fruit halves as follows:
Automatic model
Automatic model
- Place the fruit half centered over the reamer and lower the splash cover until the cone comes
in contact with the fruit.
- Apply downward pressure to the splash cover handle. The motor will start automatically.
- Ream the fruit until all the juice is removed, then raise the cover and remove the fruit. Repeat
the process with the remaining fruit halves.
Semi-automatic model
55
Fig. 28