switel iSmart-CAM BSW 220 Manuel De L'utilisateur page 15

4 .
2. Record:
8
Tap the icon to enable HD 720p recording, tap it again to disable recording.
Note 1: Recording is only possible when a micro SD card is
2: The system supports micro SD cards with a maximum
3: A 1GB memory card is able to record about 2 hour of VGA video or
4: If motion detection is not activated, the camera will
5: To playback recorde
4 .
2. Record Setting:
9
Select the resolution of recording files as VGA (640x360) or HD (1280x720)
4 .
Video Playback:
2.
10
Playback the recording files on smartphone or tablet directly.
4 .
SD Card Safety Remove:
2.
11
Tap this icon before you remove SD card out. Make sure you stop motion or
continuous recording first.
4 .
Video Setting (See Fig. 17.):
2.
12
a. Flip: Tap the Flip icon to flip the video when mounting the camera on the
ceiling.
b. Mirror: Mirror or invert the image.
c. Video Resolution: the number of distinct pixels in each dimension that can
be displayed, i.e.
HD (1280X720) /VGA(640X360) /QVGA(320X180).
d. Bit rate: the number of bits conveyed per second in telecommunications.
The higher the rate the greater the bandwidth consumption.
inserted into the camera.
capacity of 32GB.
1 hour of HD video. New images will overwrite old images when the
card is full.
record continuously.
Place the micro SD card into an SD card adapter.
Connect the card adapter to a computer.
Use a media player such as VLC to playback the recorded file.
Do not remove the memory card while recording is still in
progress, otherwise the recording will be damaged.
file
d
14