9circle 9CL-30500 Manuel D'utilisation page 3

®
孚IR.CLE
AIR POWERED BRAKE CALIPER WIND BACK TOOL SET (16 PCS)
4. INSTRUCTIONS
Step 1: Choose a suitable-sized adapter for the piston in the wheel cylinder, and fit it onto the magnetic
(A) tip of the tool. Connect the tool to shop air; make sure that the pressure does not exceed 8 bar.
Step 2: Press release button (B) and rotate the lever (C) to adjust the length of the push shaft (E).
Step 3: Press operation button (D) and rotate the lever (C) to push the piston backward.
Step 4: Press release button (B) before disconnecting from shop air.
A. Magnetic tip
B. Pressure release button
C. Lever
D. Operation button
E. Push shaft
www.9circleint.com
回