RC Lighting HBLED Instructions D'installation page 6

®
HBLED HSLED HNLED DC INSTALLATION INSTRUCTIONS
Thank you for buying RC lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments.
Call the Marketing Department at 888-722-1000 or email: marketing@rclighting.ca
ON-OFF WIRING
Universal voltage driver permits operation at 120V thru 277V,
50 or 60 Hz.
1. Connect the white fixture lead to the (+) LINE supply lead.
2. Connect the black fixture lead to the (-) COMMON supply
lead.
3. Connect the GROUND wire from fixture to supply ground.
(+) (+) WHITE
(-)
(-) BLACK
Patent Pending
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during
installation, operation or maintenance.
Easy Installation & Product Help
Tech Help Line
©2015 RC LIGHTING, LLC
Call our experts 888 722-1000
Northvale, New Jersey 07647 USA
HBLED HSLED HNLED DC-IN-0515 RCL
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough
to touch. Do not clean or maintain while fixture is
energized.
1. Clean lens & fixture with non-abrasive cleaning solution.
2. Do not open fixture to clean the LED. Do not touch the
LED.
3. Keep leaves and debris out of hood.
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct. Refer to
wiring section.
2. Check the fixture is grounded properly.
3. If sensor is connected, check if it is working properly.
rclighting.ca
Visit our website for product info
email
Answered promptly sales@rclighting.ca