Use And Operation - oneConcept 10006663 Mode D'emploi

Mounting on Wall
Power Sources
This Music System operates on 220V~ 50Hz. Do not attempt to operate the radio on any
other power source. You could cause damage to the unit and void your warranty. Please be
sure the power outlet you plug this unit into is working and receives constant (unswitched)
power. The System is also equipped with a battery back-up system for the clock that is po-
wered by 2 pieces of "AA" (UM-3) size batteries (Not included).
Setting the clock
The clock has to be set before using the system for the first time. When you connect the
System to the AC outlet for the first time the clock display will show „12:00" and will need
to be set. For examp- le set the clock time at 7:30 AM.
1. Press and hold the TIME button and repeatedly press the HOUR button to set the correct Hour.
2. Press and hold the TIME button and repeatedly press the MIN button to set the correct Minute.
Note: There is a PM INDICATOR located on the left-hand side of the clock display. Be sure
to observe the PM indicator when setting the time to make sure the time is set correctly for
AM or PM. If the PM indicator appears, the time displayed is „PM". If the PM indicator is not
shown, the time displayed is „AM".

Use and Operation

13