GiBiDi DCF180DB Mode D'emploi page 20

20
Dichiarazione di conformità UE
Il fabbricante:
Dichiara che i prodotti: DCF180DB
Sono conformi ai seguenti regolamenti:
• EMC 2014/30/UE
• LVD 2014/35/UE
e che sono state applicate le seguenti norme:
• IEC 61000-6-2 : 2016 RVL
• IEC 61000-6-3 : 2020
• IEC 60335-1
Data 03/04/20
UKCA Declaration of conformity
The manufacturer:
Declares that the products: DCF180DB
Are in conformity with the essential requirements and other relevant requirements of:
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012
Electrical Equipment (Safety) Regulations 2016
Radio Equipment Regulations 2017
And that the following harmonised standards have been applied:
EN 301 489-1 V2.2.0; EN 301 489-3 V2.1.1; EN 300 220-2 V3.2.1; EN 62479:2010;
EN 60950-1:2014;
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Date: 03/04/20
EU manufacturer declaration: The EU declaration is available at: http://conformity.gibidi.com
GI.BI.DI. S.r.l.
Via Abetone Brennero, 177/B,
46025 Poggio Rusco (MN) ITALY
GI.BI.DI S.r.l.
Via Abetone Brennero, 177/B,
46025 Poggio Rusco (MN) - ITAL
Il Rappresentante Legale
Michele Prandi
The legal Representative
Michele Prandi
DCF