Integratech UNIDRIVER50 Mode D'emploi page 5

UNIDRIVER50
L
N
AC power input
PRI
200-240V~
N
L
DA/L
DALI
DA/N
DALI/AC Push input
DA/N
DALI
DA/L
PUSH DIM
L
N
1-10V signal input
0/1-10V
GND
Dips to set the operation current
• Dimmable LED driver with DALI & AC Push & 1-10V dimming interfaces
• 1 channel constant current output, max. output power 50W
• Output current 250mA-1300mA selectable by DIP switch
• Enables to control single color LED lighting
• Class power supply, full isolated plastic case
• High power factor and efficiency
• Complies to IEC 62386-101, IEC 62386-102, IEC 62386-207
• Compatible with universal DALI masters that support DT6 commands
• Compatible with universal 1-10V dimmers
• IP20 rating, suitable for indoor LED lighting applications
!! Always switch off the power before changing the dip switches !!
Settings for Integratech QT panel series
30W:750mA
36W:900mA
Settings for Integratech MANGA panel series
30W : 750mA
36W : 900mA
40W : 1000mA
50W : 1200mA
Toolless connection range: 0,75~2,5 mm²
Important: Read All Instructions Prior to Installation
Function introduction
UNIDRIVER50
LED Driver Constant Current
DALI & AC Push & 0/1-10V
PRI:200-240V~ 50/60Hz 0.27A
SEC:
250mA,8-48VDC,Max.12W 800mA,8-48VDC,Max.38.4W
300mA,8-48VDC,Max.14.4W 850mA,8-48VDC,Max.40.8W
350mA,8-48VDC,Max.16.8W 900mA,8-48VDC,Max.43.2W
400mA,8-48VDC,Max.19.2W 950mA,8-48VDC,Max.45.6W
500mA,8-48VDC,Max.24W 1000mA,8-48VDC,Max.48W
600mA,8-48VDC,Max.28.5W 1100mA,8-45.5VDC,Max.50W
700mA,8-48VDC,Max.33.6W 1200mA,8-41.6VDC,Max.50W
750mA,8-48VDC,Max.36W 1300mA,8-38.5VDC,Max.50W
NC
λ .
> 0 93@230VAC
Ta:-20~+45℃ Tc: 75 ℃
For indoor use only
output to led panel
SEC
Product Data
LED output
Selectable Current 250mA 300mA 350mA 400mA 500mA 600mA
DC Voltage Range 8-48V
Output Selectable Current 800mA 850mA 900mA 950mA 1000mA
DC Voltage Range
8-48V
Current Accuracy
Rated Power
Voltage Range
Frequency
Input Power Factor (Typ.)
Efficiency (Typ.)
Input Current
Inrush Current (Typ.)
Dimming Interface
Control
Dimming Range
Short Circuit
Over Current
Protection
Over Temperature
Working Temp.
Max. Case Temp.
Environment
Working Humidity
Storage Temp. &
Humidity
Safety Standards
Withstand Voltage
Safety&EMC
EMC Emission
EMC Immunity
EN61547, EN61000-4-2,3,4,5,6,8,11, surge immunity Line-Line 0.5KV
MTBF
Others
Dimension
1
700mA 750mA
8-48V 8-48V 8-48V 8-48V 8-48V 8-48V
1100mA 1200mA 1300mA
8-48V 8-48V 8-48V 8-48V 8-45V 8-41V
±3%
50W
200-240V AC
50/60Hz
>0.9
> 87% @ 230VAC
0.27A @ 230VAC
COLD START Max. 2A @ 230VAC
DALI & AC Push & 1-10V (current draw <1mA)
1%-100%
Yes, auto recovery after fault removed
Yes, auto recovery after fault removed
Yes, auto recovery after fault removed
-20 ℃ ~ +45 ℃
85
℃
10% ~ 95% RH non-condensing
40 80 , 10% ~ 95% RH
- ℃ ~ + ℃
EN61347-1, EN61347-2-13
I/P-O/P: 3.75KVAC
EN55015, EN61000-3-2, EN61000-3-3
193.6K hrs min.@ 230VAC at full load and 25℃
ambient temperature
164.6*83*34.5mm (L*W*H)
8-48V
8-38V