Num'axes ProMAX Guide D'utilisation page 15

4. Activate the rangefinder
Press the OPEN button for approximately ½ second to activate the LCD display.
5. Adjusting the eyepiece
You have to adjust diopter in order to obtain a clear image in the LCD display
(+/- 5 diopter adjustment).
- Rotate
the
counterclockwise until it comes to a
complete stop.
- Press the OPEN button to activate the LCD
display.
- Rotate the diopter adjustment ring clockwise
until the display comes into focus.
If the diopter is not adjusted to correspond to your
eyesight, you may not be able to correctly aim at
your subject.
6. Meter/yard switching
The range can be displayed in meters or yards, as desired. Use a short press on
the OPEN button to switch on the display and see the setting currently selected
(M or Y). To change the setting, press the MODE button for approximately
1 second.
7. Measuring modes
The ProMAX rangefinder allows easy acquisition of small targets (such as a golf
flag) without inadvertently getting distances to background targets that have
stronger signal strength.
ProMAX - Indice A – Février 2020
diopter adjustment ring
15/52