Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CLEANING
Clean your Handy Reacher using a non-abrasive cleaner or mild detergent with a soft cloth.
Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads may seriously damage the
product beyond repair and should not be used. Always ensure that you wipe dry the
equipment after cleaning.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
This includes:
Tightness of all nuts/ bolts/castors
•
Other screw in/ bolt in/ push in components.
•
If in any doubt, please do not issue or use, but immediately contact your supplier for
service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
•
Specifically, check the tension of the cable string, which attaches to the trigger and
gripper (finger) section of the reacher.
•
If for any reason the cable string has become slack, carefully undo the string,
readjust the tension and re-tie the string.
Squeeze the trigger to ensure that the gripping arm fits tightly, safely and square
•
to the mian frame. If not, repeat the steps above.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or
establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt
(Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the
information is given.
Please exercise common sense and do not take any unnecessary risks when using this
product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use of your
product.
Fixing and Maintenance Instructions
3
Ver. 3 07/2012 (1002)
Publicité
Table des Matières
