Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Cleaning
To keep your Wet/Dry Vac looking its
best, clean the outside with a cloth
dampened with warm water and mild
soap.
Problem
Vac will not pick up dirt
Vac will not run
!
WARNING: If any of the power head assembly parts should become
detached or broken, exposing motor or any other electrical components,
operation should be discontinued immediately to avoid personal injury or
further damage to the vacuum. This vacuum has no user serviceable parts,
except the filter.
Replacement filters are available where
you purchased your vac. The stock
number is VF2000.
TROUBLESHOOTING
Cause
1. Clogged filter
2. Clogged hose
3. Air leak
1. No electricity
REPLACEMENT FILTER
8
(continued)
Storage
Before storing your powerhead, the cord
should be wrapped around the unit to
keep it from getting damaged.
The supply cord cannot be replaced. If
the cord is damaged, the vac should be
destroyed and replaced.
1. Clean or replace filter
(follow instructions on
page 7)
2. Remove hose and
clear debris.
3. Make sure power
head is securely
attached to bucket and
the bucket is one of the
designated types
1. Make sure electrical
outlet has voltage.
(A qualified electrician
may need to be
contacted).
Remedy
Publicité
Table des Matières
