Blaupunkt BLP3360-002 Mode D'emploi page 15

Press and hold the Play/Pause button to initial automatic channel search. Searched channels
will be saved automatically. Press the < or > to select channels.
Auxiliary Mode
Plug the AUX cable to the Aux In jack of the speaker to enter AUX mode or press the button M
repeatedly to switch to AUX mode. Voice prompt "Auxiliary connection" will be played. Connect
the other end of the 3.5mm Aux cable to peripheral devices to play music.
EQ
Press the button EQ to change different EQ tones when playing music.
System Reset
The system of the speaker can be reset if the speaker malfunctions or do not response. Prepare
a thin toothpick-sized stick and insert it through the reset hole until it pushes the inner reset
button to reset.
Charging the speaker
Using the provided DC to USB power cable, connect the cylindrical DC connector to the DC In
Jack on the rear panel of the speaker and connect the standard USB Connector to a USB Power
Source, such as a laptop computer or smartphone USB charger (Not included). A red light ring
on the speaker indicates charging and turns off when charging completes. Please note that the
speaker will play warning sounds when the battery level is low.
Clock & Alarm
Short press the POWER button when the speaker is on to switch to clock mode. Press to set
alarm and press I to set clock. When the alarm rings, press the play/pause to snooze. The alarm
will ring again after 5 minutes. Press the button to stop the alarm without disabling the alarm
for the next day. Press & hold the to enable/disable the alarm function. An alarm indicator
appears when alarm is enabled.
Note: The clock will reset to 00:00, if the speaker is powered off completely or if the speaker is
out of battery. Charge the speaker constantly and do not long press the power button to allow
the clock remains functional.
Status indications
Blue light ring : Pairing mode : Blue light flashes when waiting for a connection and stays on
when paired.
Red light ring : Charging : Red light turns on when charging and turns off when charging
completes.
Declaration of conformity UE