Argon 18 DARK MATTER 341A Guide D'assemblage page 18

DARK MATTER 341A / 341B:
1. With the rear brake housing coming from
the back of the bike, guide the end of the
housing through the hole on the frame's
down tube.
2. Use the brake housing to insert the foam
liner around the brake housing.
3. Guide the end of the housing through the
opening of the mechanical console cap (1).
4. Secure the brake housing into the console
insert for mechanical drive train (7).
5. Secure the mechanical insert into the
console cap.
6. Fix with the provided screws the console
cap on the frame.
7. Wire the mechanical cable and housing
in the appropriate hole of the insert (8), see
image below.
10. Console / E. Mechanical Single chainring
Butée de gaine de
dérailleur arrière
Durite de
freins arrière
9
7
1
16