Argon 18 DARK MATTER 341A Guide D'assemblage page 15

DARK MATTER 341A / 341B: 10. Console /
B. Spécifications du boîtier de jonction Di2 ext.
1. With the rear brake housing coming from
the back of the bike, guide the end of the
housing through the hole on the frame's down
tube.
2. Use the brake housing to insert the foam
liner around the brake housing.
3. Guide the end of the housing through the
9
opening of the mechanical console cap (1).
4. Insert the Di2 wire from the external
junction box A through the hole in the
mechanical console cap.
5. Secure the Di2 wire into the Di2 external
insert.
8
6. Secure the brake housing into the Di2
external insert.
1
7. Secure the Di2 external insert into the
console cap.
8. Fix with the provided screws the console
cap on the frame.
Câble Di2
Durite de
freins arrière
13