Bestop 77332 Instructions D'installation page 12

Section 7
Unfold Bows; Attach Pivot Arm Braces; Engage Locking Levers
Step 1
Step 1
Unfold the Bow Assembly.
Step 2
1 Pull back on the Pivot Knuckle
release knob;
2 Snap the Pivot Arm Brace into
place, on both sides of the truck.
P12 - 77332 Rev. D 0121
Step 2
2
Installation Instructions - Supertop for Trucks
Step 3
1
Lever-Stop
Step 3
Engage the Locking Lever on both sides
of the truck.
NOTE:
The Lever-Stop Assemblies are
pre-installed at the factory at 22.875"
from the front edge of each Side Rail.
Page 12
© 2021 Bestop, Inc.