Headphone Connection - Peaq PDR160BT-B Mode D'emploi

Size = A6
ENGLISH
Note
If [DAB] or [FM] is selected, [last listened]
will be displayed. Press SELECT to
confirm.
7. The volume bar will be displayed. Ad-
just the volume with
firm with SELECT.
8. Switch on/off the alarm [Alarm on/
Alarm off] with
with SELECT.
9. The alarm settings are stored and
[alarm saved] is displayed.
Activating or deactivating the alarm
timer
1. Press ALARM in standby mode to
show the alarm state.
2. Press ALARM repeatedly, to select the
following options:
• Alarm1: Off / Alarm2: Off
• Alarm1: On / Alarm2: Off
• Alarm1: Off / Alarm2: On
• Alarm1: On / Alarm2: On
Repeat alarm
When the alarm sounds, press DIMMER/
SNOOZE to select the slumber function
interval:
• [Snooze 5 minutes]
The alarm repeats after 5 minutes.
• [Snooze 10 minutes]
The alarm repeats after 10 minutes.
• [Snooze 15 minutes]
The alarm repeats after 15 minutes.
• [Snooze 30 minutes]
The alarm repeats after 30 minutes.
Turning off the alarm
When the alarm sounds, press Power to
turn the alarm off.
20
_PDR160BT-B-180110_V04_HR.indb 20
All manuals and user guides at all-guides.com
/ and con-
/ and confirm
Selecting the backlight settings
Press repeatedly DIMMER/SNOOZE to
select following illumination settings:
• [Low] Low
• [Medium] Medium
• [High] High
• [Off] Off, backlight
deactivated.
Connections
AUX-IN
This radio allows you to listen to external
audio devices.
1. Connect a cable (not included) to the
AUX-IN jack (3.5 mm) at the back of
the radio.
2. Press Mode to select AUX.
3. Start playback from the device.
Attention
Before connecting an external playback
device, carefully read the respective user
guide and safety instructions as well as
instructions concerning usage with other
devices.

HEADPHONE CONNECTION

Connect the headphones to the Head-
phone jack of the device.
Attention
Danger! Excessive sound pressure levels
from ear buds and headphones can cause
hearing damage. Listening to loud music
for extended periods of time may lead to
hearing impairment. Keep the volume at
reasonable levels.
is completely
10/1/18 10:20 am