NSS Enterprises M-1 Guide Rapide page 7

Symptom
Machine Does Not Run.
Machine Has Poor Or No Suction.
Machine is Difficult to Move.
Bag Leaks.
Bag Rod Loose.
Machine is Damaging Furniture.
Repair service for this machine must be performed by an NSS authorized service center. Repairs performed by an
unauthorized company will void the machine warranty. If you require assistance finding an authorized service center,
contact NSS Enterprises.
TROUBLESHOOTING
Cause
Damaged Switch.
Damaged Cord.
Jammed Fan.
Armature Burned up.
Coil Burned Up.
Obstruction in Hose, Tool or Wand.
Scrap Trap Full.
Obstruction in Fan Hood.
Full Bag.
Obstruction in Filter Bag Tube.
Fan Worn out.
Carbon Brushes Worn Out.
Brush Shunt is Twisted.
Damaged Wheels.
Damaged Caster.
Zipper is not Closed Completely.
Improper Coupling connection.
Gasket Missing or Damaged.
Loose Set Screw.
Loose Upper Screw.
No Satellite Bumper.
Solution
Change Switch.
Change Cord.
Remove the Jammed Object.
Replace Armature.
Replace Coil.
Remove Obstruction.
Empty Trap.
Remove Obstruction.
Replace Bag.
Remove Obstruction.
Replace Fan.
Replace Brushes.
Untwist.
Replace Wheels.
Replace Caster.
Close Zipper.
Adjust Coupling Connection.
Replace Gasket.
Tighten Set Screw.
Tighten Upper Screw.
Install a Satellite Bumper Assembly.