Publicité
Les langues disponibles
Les langues disponibles
AWLS-LED
INSTALLATION INSTRUCTIONS
CCT & LUMEN SELECTABLE SWITCHES
-
CCT selectable switch is included in every luminaire. It is accessed inside
during installation. The switch can be set to 3000K, 4000K, and 5000K CCT.
4000K is default.
-
Lumen selectable switch is included in some models. It is accessed inside
during installation. Lumens vary depending on model. Max lumen setting
is default.
AWL1S-LED30A15: 1=30W, 2=20W, 3=15W
AWL2S-LED80A50: 1=80W, 2=60W, 3=50W
AWL3S-LED120-100: 1=120W, 2=110W, 3=100W
WIRING
•
Check that the line voltage is correct.
•
Connect fixture GROUND (green) wire to power supply GROUND (green) wire.
•
Connect fixture WHITE wire to power supply NEUTRAL wire.
•
Connect fixture BLACK wire to power supply LINE wire
•
The fixture includes 0-10V dimming functionality, connect GREY and VIOLET
wires to a 0-10V dimming controller (optional).
RAB Design Lighting inc.
Dec 2020
Page 2 of 2
Publicité
