Insert Battery; Installling Lp Gas Tank; Insert Lp Gas Tank; Secure Lp Gas Tank - Blue Rhino 235000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
13

Insert Battery

K
x 1
Installing LP Gas Tank
To operate you will need (1) precision-filled standard grill LP gas
tank (20 lbs.) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.
Caution: LP gas tank must be properly
disconnected and removed prior to moving this
heater.

Insert LP Gas Tank

Place precision filled LP gas tank upright into hole in patio heater so it is arranged for vapor
withdrawal.

Secure LP Gas Tank

Secure tank in place by attaching loose end of tank restraint chain to hole in right leg.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in
the head of the LP gas tank, head of the regulator valve or
in the head of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it
stops.

Disconnect LP Gas Tank

Before disconnecting make sure the LP gas tank valve is
"CLOSED".
Disconnect gas line from LP gas tank by turning knob
counterclockwise until it is loose.
Caution: LP gas tank must be properly
disconnected and removed prior to moving
this heater.
Need a tank of gas? Try tank exchange service. It's easy, fast,
safe, and available at tens of thousands of conveniently located
retail outlets nationwide. You can purchase a new full tank or
exchange your empty for a precision filled one.
page no.
7

Publicité

Table des Matières
loading

Table des Matières