Usage Location; Electrical Installation - Barista Technology Puqpress Manuel D'instruction

7.
8.
too loose, start again at step 4.

4.2 Usage location

Place the tamper on a level, vibration-free surface.
Never operate the tamper in moist, or even worse, in wet
surroundings!

4.3 Electrical installation

A damaged power cable must be replaced immediately.
Let the defective cords and plugs be replaced immediately
at a customer service repair facility or your dealer.
1. Insert the power cord in the socket at the back side of the
tamper.
2. Insert the plug into the corresponding grounded outlet.
WARNING: Portafilter may not
wiggle with correct
lower clamp setting.
If portatiler wiggles
operator may
have access to
dangerous
moving parts
EN
9