Publicité
Les langues disponibles
Les langues disponibles
FITTING INSTRUCTION ALMIRA MIRROR
Important :
• Carefully inspect the mirror before installation. If there are any problems, report it immediately to your dealer as no claim for damage will be considered after installation. No claims
for defects or damages will be accepted once the mirror has been installed.
• Mirrors are guaranteed for one year from date of invoice, no claim will be considered if product has not been installed and cared for as recommended in our fitting and care ins-
tructions.
• The mirror may have defects which are naturally associated to the product. The visual inspection must take place at a minimum of 70cm. If the defect is not visible at this distance
the claim will not be accepted.
• For claims about defects appearing over time (e.g. de-silvering, ageing of glass etc.) the product must be inspected by a representative of Ambiance Bain to clarify if there is a
viable claim.
• The guarantee covers products in domestic use by the consumer only and not commercial or business use.
• Liability is limited to individual products and does not cover consequential loss/damage or any further unfitting/refitting costs or financial compensation.
• Installation must be made by a qualified professional, the guarantee will not apply if the product is incorrectly fitted.
Maintenance :
• For mirrors, use a chamois leather, and dry the edges with a suitable soft cloth.
• Use a dry cloth to clean any electric components, they must be switched off
OUR MIRROR WILL DETERIORATE THROUGH EXCESSIVE WATER SPILLAGE OR HEAVY CONDENSATION. IT IS AD-
VISED THAT EVERY BATHROOM SHOULD BE WELL VENTILATED AND FITTED WITH A SUITABLE EXTRACTOR FAN TO
AVOID ANY PERSISTENT HUMIDITY TO PRESERVE THEIR QUALITY.
Electrical installation :
Mirrors with electrical components must only be installed in ZONE 3. Installation and fitting of all electrical items
must be completed by a qualified electrician. Any final decisions regarding the installation should also be made by
the electrician. All electrical items must be tested prior to installation, as liability is limited to replacement items only.
All information is dowloadable from the website
PREPARATION OF THE INSTALLATION AREA
Set up a protected installation area (blancket)
Unpack carefully the mirror
Be careful do not damage with the stanley knife
Clean the mirror with a mild, non-greasy product on the front
FIX THE SCREWS (not provided)
1
1 Determine the finished
height
PREPARATION OF THE ELECTRICAL INSTALLATION
(lighting is packaged in a bag within the mirror)
1
www.ambiancebain.com
tools required
2
3
2 Fix the first
3 The screw must
protrude maximum 8 mm
from the wall
Pass the cable through the bracket and screw
lighting
(For the mirrors with two
2
4
4 Place the second screw
aligning it with the first one
1 Mark the middle of the
mirror
lights plac it in the middle of
the half mirror)
2 Screw the lamp with
the two screws provided
C055V1.1
C055V1.2
All dimensions are in mm.
Recommended height 1600 mm at the middle of
the mirror to the floor.
C AU T I O N:
Ensure that you use the correct fixing ac-
cording to the type of wall material.
UK
Publicité
