Connections - Telecom Behnke 10-IP Serie Manuel D'instructions

connections

2.
T4
1: white-green
2: green
3: white-orange
6: orange
Inside
Open door func-
tion for a specific
floor or additional
door bell Open door function
www.behnke-online.com
Additional relay
(additional door bell
or open door function)
Ethernet connection
according to EIA/TIA 568 A
Additional 20-9598 PoE Switch
floor button
Müller
4
Switching contact
potential-free
Instructions for SIP Indoor Station
Use an RJ-45 connector to establish a network
connection ( "INPUT"). You may also connect
the individual cores to the connection interface
using a terminal block (
nected to the terminals marked 1 (white-green),
2 (green), 3 (white-orange) and 6 (orange)
according to EIA/TIA specification 568 A. The
number indicated refers to the pin position of
the RJ-45 plug / the RJ-45 socket. To connect a
potential-free floor call button, please use the
terminal marked "T4" (
( ) holds to additional functions: It enables
connection of an additional door bell or connec-
tion of an open door function for a specific floor.
Choose one of these function from the web front
end and connect either the additional door bell
or the open door function for a specific floor to
the terminal block. Please note that power for
either the additional door bell or the open door
function for a specific floor will be supplied
from the device.
Outside
4
Connections
): The network is con-
). The additional relay
Open door function contact
potential-free
GB
17