14. Insert 21 Wood Screws (J) into the pre-drilled holes of the Back Panels (F&G), as seen in the illustration below.
15. Tighten with a Philips Head Screwdriver (not provided).
16. If needed, adjust the levelers located under the legs to keep the bookcase level.
Care Instructions:
•
Dust often using a clean, soft, dry, and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp cloth.
•
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary
Date: 2013-Jul.-02
Rev:
F
G
www.pbteen.com
I
K
L
J
21x
Page 4 of 8
4x
4x
4x