PB TEEN BEADBOARD 2 SHELF BOOKCASE Instructions De Montage page 3

Assembly Instruction Steps:
1. Place the Right Side Panel (C) down on the soft, scratch- free surface with pre-drilled holes facing up, as seen
in the illustration below.
2. Align the pre-fixed wooden dowels of Shelf (D) and Bottom Panel (E) to the pre-drilled holes on the Right Side
Panel (C), as seen in the illustration below.
3. Secure with 4 sets of: Bolt (I), Spring Washer (K), Flat Washer (L), as seen in the illustration below.
4. Loosely tighten with Allen Key (H).
5. Attach the Left Side Panel (B) to Shelf (D) and Bottom Panel (E) by aligning the pre-drilled holes of the Left
Side Panel (B) with the pre-fixed wooden dowels on the Shelf (D) and Bottom Panel (E).
6. Secure with 4 sets of: Bolt (I), Spring Washer (K), and Flat Washer (L) through the pre-drilled holes of the
wooden cleats under Shelf (D) and Bottom Panel (E) and into the metal inserts of Left Side Panel (B), as seen
in the illustration below.
7. Loosely tighten the bolts with Allen Key (H).
8. Turn the assembled piece upright.
9. Slot the Lower Back Panel (G) into the grooves of the back posts of the Left Panel (B) and Right Side Panel (C)
first and then the Upper Back Panel (F), as seen in the illustration below.
10. Put the Top Panel (A) onto the Left and Right Side Panels (B&C), as seen in the illustration below.
11. Secure with 4 sets of: Bolt (I), Spring Washer (K), and Flat Washer (L) through the pre-drilled holes on the
wooden cleats of the Left and Right Side Panels (B&C) and into metal inserts of Top Panel (A).
12. Loosely tighten with Allen Key (H).
13. Check alignments and tighten ALL bolts with Allen Key (H).
Date: 2013-Jul.-02
Rev: www.pbteen.com
I 4x
K 4x
L 4x
I 4x
K 4x
L 4x
Page 3 of 8