5.2. Cas de l'installation directe sur poteau
Direct pole mounting
1. Localiser les fentes au dos du boîtier
OUTDROP 2+ BRASSAGE.
2. Insérer un collier de fixation (feuillard inox)
dans les fentes.
La largeur du collier (feuillard
inox) ne doit pas dépasser 25 mm.
ABS1496/B
OUTDROP 2+ BRASSAGE
1. Identify the slots at the rear of the
OutDrop 2+ Patching.
2. Insert the mounting strap (stainless steel
metal strip) in the slots.
The width of the mounting strap
(stainless steel metal strip) must
not exceed 25mm.
Fig. Installation du collier de fixation
Installing the mounting strap
25mm
(max.)
20/42