Making Connections; Connecting The Tv Signal Source - Asus Asteio D22 Mode D'emploi

Making connections

Connecting the TV signal source

Your Media Center PC has connectors for Video-In or coaxial (TV) input. Select the connector that your
video source supports:
• Video-In
The video signal that provides the highest quality video for your Media Center PC. If you use
Video-In, you also need to connect the audio source using RCA stereo plugs.
• Coaxial (TV)
The video and audio signals are both carried on one cable. The coaxial cable is the easiest way to
connect a direct cable or an antenna video source to your Media Center PC.
Note:
In a MCE environment, if the device is set to receive digital TV signals, the analog TV and FM radio
functions will be disabled and vice versa.
Connecting to the TV signal using S-video
1. Connect the Video-In cable provided from a video source such as a cable set-top box, a satellite set-
top box, or other video source device, to the Video In adapter cable provided. Next, connect it to the
Video-In port on the back of your Media Center PC.
2. Connect an RCA cable from the Audio Out jacks on the video device to the Line In (red) jack on the
back of your Media Center PC.
Note:
You need to use the RCA adapter
cable to connect to the RCA
cables.
8 Asus Media Center PC
VIDEO-IN
HDMI
TV1
2.0 CENTER TV2
VIDEO OUT 2.0
S / P D I F
Y E - S ATA
I R 1 REAR
S / P D I F
s
I R 2 P b SIDE
2.0
P r
VIDEO-IN
15