Function; Main Functions; Changing The Settings - Indel B Sleeping 1600 Well Mode D'emploi

5.0 - OPERATION
The operation of "SLEEPING WELL OBLÒ AIRCON 1600" can be controlled directly by the control panel or remotely by means of the remote
commander.
The remote commander operates the main functions but changes to the standard settings may be done only by means of the control panel.
WARNING: changing the standard settings must be carried out only by qualified personnel. Any change performed without the proper
skills may cause damage to "SLEEPING WELL OBLÒ AIRCON 1600" and/or to the vehicle.

5.1 - MAIN FUNCTIONS

ON – OFF - A rapid pressure on the button turns
When the device is on, the display always shows the last set
- Every pressure of the key cycles through the modes MIN, AUTO and MAX. The corresponding icon lights up.
MIN
MODE
AUTO
MAX
- When the device is off, if you press the MODE button, you will activate the DEFERRED ACTIVATION mode and the relative icon
elapsed, shown on the display; the number of hours can be set between 1 and 99 by using the TEMPERATURE
Each
VENTILATION -
levels of ventilation. The display will show the selected level.
- When the device is off, if you press the (+ / -) button, you will activate only the ventilation.
TEMPERATURE - Each pressure of the (+ / -) buttons corresponds to the increase or decrease of one degree of temperature: from a minimum value
of 17 to a maximum of 32. The display will show the selected temperature.

5.2 - CHANGING THE SETTINGS

WARNING: before changing any setting, carefully read the following notes.
WARNING: changing the standard settings must be carried out only by qualified personnel. Any change performed without the proper
skills may cause damage to "SLEEPING WELL OBLÒ AIRCON 1600" and/or to the vehicle.
To access the setting menu, simultaneously press the
To scroll between menus use the
The values will be saved after a few moments without touching anything else.
You can exit from the menu by not touching any button.
18
This corresponds the lowest power setting of "SLEEPING WELL OBLÒ AIRCON 1600" (lowest performance
and lowest compressor speed – the timer is set for a continued function of 6 hours, after which "SLEEPING
WELL OBLÒ AIRCON 1600" goes off automatically). (The timer can be modified with the
"Changing the settings" section).
The management is automatic (performance and compressor speed are managed automatically based on the
temperature required by the user and on the current temperature - the timer is set for a continued function of 4 hours,
after which "SLEEPING WELL OBLÒ AIRCON 1600"
P1 parameter - see the "Changing the settings"
This corresponds to the highest power setting of "SLEEPING WELL OBLÒ AIRCON 1600" (highest performance
and highest compressor and ventilator speed), after 20 minutes "SLEEPING WELL OBLÒ AIRCON 1600" goes to
the "AUTO" mode.
lights up: "SLEEPING WELL OBLÒ AIRCON 1600" will turn itself on automatically after a certain number of hours have
pressure (+ / -) corresponds to the increase or decrease of the ventilation speed: you can choose between 6 different
(+ / -); buttons; to choose the desired values, use the
ENGLISH
"SLEEPING WELL OBLÒ AIRCON 1600". on and off.
temperature.
goes off
section).
(+) buttons while the device is off.
(+ / -) and
P0 parameter - see the
automatically). (The timer can be modified with the
(+ / -) buttons.
Sleeping Well Oblò AIRCON 1600_31-05-2017
(+ / -) buttons..